O-Seal Pipe Thread Connector RMC-NO
O-Seal Pipe Thread Connector RMC-NO
↪ This connector is designed for pipe threads and utilizes O-rings for sealing purposes. It's specifically intended for use with pipe threads, where a tighter seal is needed compared to straight threads.↪ The O-Seal Pipe Thread Connector, designated as RMC-NO, is a type of fitting commonly used in fluid systems to create a secure connection with pipe threads while ensuring a reliable seal with an O-ring.
➢ 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" (inch sizes)
➢ M10x1.0, M12x1.25, M14x1.5, M16x1.5, M20x1.5, M24x2.0 (metric sizes)
Join a fractional tube to a Female NPT thread
➢ Maintenance: Regular inspection of the O-ring condition and torque checks on the fittings are recommended to maintain the integrity of the seal and prevent leaks. O-rings should be replaced if signs of wear or damage are detected.
➢ Design: The connector is designed to interface with pipe threads, which are tapered threads commonly used in piping systems. The tapered nature of the threads facilitates a tight seal as the connector is screwed into the mating component.
➢ Installation: Installation of RMC-NO connectors involves threading the connector into the mating pipe or component until it forms a secure connection. Proper tightening ensures that the O-ring is adequately compressed to create an effective seal.
➢ Material: These connectors are typically made from materials such as stainless steel, brass, or other corrosion-resistant materials. The choice of material depends on factors such as compatibility with the fluid being conveyed, environmental conditions, and application requirements.
➢ Applications: These connectors are commonly used in piping systems for conveying fluids such as water, oil, gas, and hydraulic fluids. They are suitable for both low and high-pressure applications and are used in various industries, including plumbing, HVAC, automotive, and manufacturing.
➢ Sizes: RMC-NO connectors are available in various sizes to accommodate different pipe thread specifications. Standard sizes include 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2" for inch sizes, as well as metric sizes like M10x1.0, M12x1.25, M14x1.5, M16x1.5, M20x1.5, and M24x2.0.
➢ Sealing Mechanism: Similar to the O-Seal Straight Thread Connector, the RMC-NO connector incorporates an O-ring seal. The O-ring is positioned within a groove on the connector and is compressed when the fitting is tightened. This compression creates a tight and leak-proof seal between the connector and the mating pipe or component.
